LED LINEAR TRUNKING SYSTEM
The LED Linear Trunking System is a continuous LED lighting system.
All system components, trunking rail and luminaire inserts are perfectly matched according to 1500mm/600mm system dimensions.
Triple, double and single-length rails can be combined to comply with the space involved.
FEATURES:
- Low installation cost - everything in one box and installation is tool-less
- The high light efficiency of 130 lm/W makes reduction on energy consumption and additional cost
- Ra >80
- CCT: 3,000K/4,000K/5,000K/6,000K
A wide range of optics from 30° to 120° distribution, as well as asymmetric and double asymmetric distribution
- Emergency versions available
- Dimming versions available
- Different length with various power is available
- X, L and T Standard Module Node connectors with electrical feed-in and feed-out
- Mounting Options: chain suspended, cord suspended, rod suspended or surface mounted
- Colour scheme: White
APPLICATIONS:
- Commercial
- Industrial
- Warehouse
- Other indoor lighting
Technical Data Sheet
| Light Housing |
| Material |
Aluminum profile |
| Colour scheme |
White |
| Installation type |
Rotatory knob or holding clamp |
| Dimensions( Length x Breadth x Height) |
1,435 x 70 x 70mm |
| Weight |
Approx.4 kg |
| Protection type |
IP20 |
| Illuminant properties |
| Illuminant Type |
LED-Moduls with Mid-Power-LEDs |
| Optical System |
Wide,Narrow,wide,Flat and double Asymmetric light distribution |
| Luminous Flux |
7,200lm - 7,800lm |
| Luminous Output |
120lm/w -130lm/w (Customized) |
| Colour Temperature |
3,000K / 4,000K / 5000K / 6000K |
| Colour Rendering Index(Ra) |
> 80 |
| Dimming( Power control) |
With / without DALI |
| Lifetime at (ta)30° |
50,000 h |
| Electronic Properties |
| Power Rating |
60W |
| Protection class |
SKI |
| Operating voltage |
100 - 240V AC |
| Frequency |
50 / 60 Hz |
| Installation Requirements |
| Application areas |
Halls,warehouses,manufacturing facilities,sales premises |
| Specific Installation |
Rail- Light System |
| Installation height |
3 to 20m |
| Permissible ambient temperature (ta) 30° |
-25ºC to +35ºC |
| Other properties |
| Certification |
CE / TUV / SAA / UL |
| Connection with circuit breaker (B16) |
150 Pcs |
| Special features |
| End cover |
IP20 |
| Blind cover |
1,435 mm |
| Mounting Rail |
1,435 mm |
Node Connector
All system components can be combined without tools. X, T and L connectors expand the system's application range.
Each node connector has diverse of electrical feed-in and feed-out. The node connector is not only to connect the cross trunking,
but also to connect the wire inside the trunking, and the node connector itself could even be the electricity feed-in point.
Illuminated modul
Connect with each other in series.
General safety instructions and information
Installation and maintenance must be performed by authorised and trained staff.
- Before wiring, make sure that the cables are de-energised. During wiring work, make sure that the cables remain
de-energised (e.g. prevent switching back on).
- Observe your national safety regulations for the installation and use of this lamp.
- The manufacturer accepts no liability for injuries or damage caused by unintended use or incorrect installation.
- If the lamp is retroactively modified, the person who made the modifications then becomes the manufacturer.
- To avoid risks, the lamp must only be operated if there are no visible signs of damage to components, in particular
to the connecting cable.
- Only the manufacturer is authorised to replace defective components.
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a
similarly qualified person.
+ All dimensions stated in mm.
+ The drawings are not to scale.
+ Technical changes are reserved.
Connect with each other in series.
- General safety instructions and information
- Installation and maintenance must be performed by authorised and trained staff.
- - Before wiring, make sure that the cables are de-energised. During wiring work, make sure that the cables remain
- de-energised (e.g. prevent switching back on).
- - Observe your national safety regulations for the installation and use of this lamp.
- - The manufacturer accepts no liability for injuries or damage caused by unintended use or incorrect installation.
- - If the lamp is retroactively modified, the person who made the modifications then becomes the manufacturer.
- - To avoid risks, the lamp must only be operated if there are no visible signs of damage to components, in particular
- to the connecting cable.
- - Only the manufacturer is authorised to replace defective components.
- - The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a
- similarly qualified person.
- + All dimensions stated in mm.
- + The drawings are not to scale.
- + Technical changes are reserved.
){kind=link}
){kind=link}